Skip to content
Shyenova

Maritime Carbon

Voyage & Speed Optimisation

Sailing full speed to wait at anchorage is the most expensive way to arrive on time. It is also one of the most common.

Fuel burned per day rises steeply with speed, so modest changes in speed have an outsized effect on fuel and therefore on every carbon obligation calculated from it. Yet speed is often set by habit, by a default in the charter party, or by a wish to be first in a queue that will hold the ship at anchor for days anyway.

Optimising it properly needs two things most fleets lack. The first is a fuel model for each ship that reflects its actual hull and engine condition rather than its sea trial. The second is an objective that includes everything a voyage costs: fuel, hire, port time, demurrage exposure and now carbon. With both, speed and arrival time become a decision with a price rather than an instruction from habit.

How the work runs

Four phases, and what comes out of each.

Durations are indicative and assume reasonable data availability. Where data is poor we say so in the first fortnight rather than modelling on sand.
01

3–4 weeks

Fit a fuel model to each ship

We fit consumption against speed, draught, trim and weather from each ship's own noon reports and, where available, sensor data, then test it against voyages it has not seen. The model shows where a ship has drifted from its curve, which is often hull fouling, and states how confident it is at each operating point.

Outputs

  • Speed and fuel model per ship, validated out of sample
  • Drift from the reference curve, with likely causes
  • Data quality findings on noon reports and sensors
02

2–3 weeks

Put a full price on the voyage

The voyage objective is built to include fuel, hire, port costs, demurrage exposure, allowance cost and FuelEU effect, so a choice of speed is evaluated on everything it changes. This is where carbon stops being a separate report and becomes part of the voyage estimate.

Outputs

  • Voyage cost model with carbon terms included
  • Cost of each knot by ship and trade
  • Sensitivity to fuel price, allowance price and port delay
03

3–4 weeks

Optimise speed and arrival

With a price on every term, speed profiles and arrival times are optimised per voyage within the constraints of the charter party and the port. Where berth availability is known in advance, the gain from slowing down rather than waiting is usually the largest single lever available.

Outputs

  • Speed and arrival recommendations per voyage type
  • Charter party constraints encoded explicitly
  • Comparison against the speeds actually sailed
04

2 weeks

Hand it to the people who fix and operate

The model is handed to chartering and operations as a tool they run, with documentation and a training session. A recommendation that lives in a consultant's spreadsheet changes nothing on the bridge.

Outputs

  • Model and code handed over with documentation
  • Integration into the voyage estimate used for fixtures
  • Training for chartering and operations staff

What good looks like

The ranges we design toward.

These are the improvement ranges these levers are known to produce where the underlying practice has not been examined recently. They are targets to test against your baseline, not promises.

Steep

Fuel against speed

Fuel burned per day rises much faster than speed, so small speed changes move fuel, and every carbon obligation, disproportionately.

Per ship

Model granularity

Sister ships diverge as hulls foul and engines age. A fleet-average curve hides the ships that matter.

0

Licences to buy

The models are yours at handover. There is no subscription and no platform behind them.

Deliverables

What you are left holding.

All of it handed over, documented, and with a session for whoever inherits it.
  1. 01Validated speed and fuel model for each ship in scope
  2. 02Voyage cost model including allowance and FuelEU terms
  3. 03Speed and arrival recommendations within charter party constraints
  4. 04Drift and fouling findings that inform hull and propeller maintenance
  5. 05Models and code owned by your team, with documentation

What an engagement looks like

A representative shape.

Illustrative. This is the shape of work in maritime carbon, not an account of a specific client. We do not publish named results, and we would be wary of a firm that publishes them without the client in the room.

12 weeks

  1. 01Situation

    A dry bulk operator with part of its fleet trading into Europe had its first EU ETS surrender approaching and no view of its FuelEU balance. Speed instructions were set commercially per voyage, bunkering was decided by price alone, and the CII rating for each ship was discovered after year end.

  2. 02What we did

    Fitted a speed and fuel model for each ship from its own reports, built one emissions dataset serving MRV, ETS, FuelEU and CII from the same fuel records, and priced allowance and FuelEU cost into the voyage evaluation used for fixtures, with a rolling CII forecast per ship.

  3. 03Where it landed

    Carbon cost appeared in the voyage estimate before fixing rather than in the accounts afterwards. Two ships heading for a D rating were identified early enough to act within the year. Allowance purchasing moved from a single deadline purchase to a schedule under a written mandate, and the models were handed to the operator's own team.

Questions

The ones we get asked.

Is this weather routing?

No. Weather routing services choose a track through forecast weather, and we do not replace them. We work on the economic decision above the track: what speed and arrival time a voyage should target given fuel, hire, port timing and carbon. The two complement each other.

Our charter parties fix the speed. Is there anything to optimise?

Often more than it seems. Many clauses allow speed to vary by agreement or set it as a maximum, and where berth timing is known both parties can be better off sailing slower. Where the speed is genuinely fixed, the model is still useful for pricing the next fixture and for settling performance claims on evidence.

How good does our data need to be?

Noon reports are enough to start, provided they are reasonably complete. Sensor data improves the model and is not required. Part of the first phase is a frank assessment of the reporting, because the same fuel figures feed MRV, ETS, FuelEU and CII and errors in them cost money four times.

Start a conversation

Talk to us about voyage & speed optimisation.

Most useful first conversations are thirty minutes and involve no proposal. Describe the problem you are looking at and we will tell you honestly whether it is one we can help with.

Or write directly to hello@shyenova.com